M6 bleed nipple for Brembo F05 and twin bleed P2 F08 & F09 calipers. Manufactured specially for Gutsibits in corrosion resistant grade 5 titanium as a replica of the original Brembo M6 bleed nipple

Use M10 bleed screw SSA36794 for single bleed (later) P8 calipers. Ducati ref. 079539787
See BRA36794 for rubber cap

 Availability varies on this part, check availability

Also fits Benelli 250 TS, Ducati 350-500 Twin, Ducati 350-500 Twin GTV, Ducati 350-500 Twin Sport, Ducati 500 SL Pantah, Ducati 500 Sport Desmo, Ducati 600 SL Pantah, Ducati 750 F1/Laguna Sec, KTM 250XC, KTM 250SX, KTM 250EXC,

Brembo rubber bleed nipple cap without retaining ring

 More than 5 in stock

Brembo caliper cover for models with F05 / P5 calipers

Also known as Guzzi ref. 20268810, 08203968.

 This part is due back in stock soon, call 01484 841395 to reserve yours

 39654700 GU39654700 39 65 47 00
 3965 4700 3965.4700 39.65.47.00

Also fits Benelli 250 TS

Brembo rebuild kit for Brembo F05 (P5) calipers with 32mm pistons. Contains 2 bolts, all seals and brake grease

This caliper also known as P2 F05N, P32B and P32F.
This seal kit also known as Brembo ref. 120279910, also used on Benelli 504 Sport, 650 Al'Azzura, Ducati 500s, Laverda 500 Montjuich and Zeta (front) and Bimota DB1 and YB4 (rear).

Not suitable for P32 rear calipers fitted to 750T and Nevada 750 (1991-2001) - see BRA01723 for this model. Will not fit pistons on Grimeca F05 calipers.

 This part is due back in stock soon, call 01484 841395 to reserve yours

 39659000 GU39659000 39 65 90 00
 3965 9000 3965.9000 39.65.90.00

Also fits Benelli 504 Sport, Benelli 250 TS, Ducati Pantah 500SL, 650 Al'Azzura, Ducati 500s, Laverda 500 Montjuich and Zeta (front) and Bimota DB1 and YB4

Pair of replacement anodised alloy pistons for Brembo F05 (P5) calipers. These also fit Grimeca calipers with 32mm pistons

Also used on some Laverdas. BRA19301 for alternative part in stainless steel

 This part is due back in stock soon, call 01484 841395 to reserve yours

 19652300 GU19652300 19 65 23 00
 1965 2300 1965.2300 19.65.23.00

Also fits Benelli 250 TS, Ducati Pantah 500SL

Complete Brembo P32 rear brake caliper

Also known as Guzzi ref. 20516171, 20516151. This replaces the original but discontinued P2 F05 caliper and is not identical. Supplied with brake pads

 This part is available by special order, request a quote

 23653011 GU23653011 23 65 30 11
 2365 3011 2365.3011 23.65.30.11

Chrome finish brake disc bolt, pre-treated with thread locking compound.

 More than 5 in stock

98230825-z 98230825 GU98230825 98 23 08 25
 9823 0825 9823.0825 98.23.08.25

5 hole disc carrier finished in black

We recommend you check your bobbins, spring washers and circlips are OK as these may also require replacement. This is an update to the non floating disc ( 28613300 / 28613301 ) fitted to Lario, T5, SP II, Monza 2, V75 and V35 3

 This part is available by special order, request a quote

 28613770 GU28613770 28 61 37 70
 2861 3770 2861.3770 28.61.37.70

Front brake disc, 6 hole mounting. Use disc bolts BRA98460

These are a deeper offset than the front discs fitted to the V35 Florida ( BRA63720 ). They can be fitted to V35s and V50s fitted with shallow offset discs mounted to a spacer if the alloy disc spacers are removed from the wheel hub. Always fit new brake pads when replacing a brake disc see BRA19724

 Sorry, this part is no longer available.

 63635720 GU63635720 63 63 57 20
 6363 5720 6363.5720 63.63.57.20

Complete drilled fully floating stainless steel EBC Brake Disc. Used for rear and front left hand brake disc for Le Mans 1000, 1000S. Rear brake disc only on Cali 3, Cali 1100, Spada 3, Strada 1000

Also known as Guzzi ref 28613660, 30635860. This is an update to the non floating disc ( 28613300 / 28613301 ) fitted to front of Nevada, Lario, T5, SP II, Monza 2, V75 and V35 3. Always fit new brake pads when replacing a brake disc - BRA54724 . Use disc bolt BRA30460

 2 in stock

28613670-z 28613670 GU28613670 28 61 36 70
 2861 3670 2861.3670 28.61.36.70